Smart Home Motor 0.5-30RPM 0.5-15W 3-24V Go-Gold For Smart Toliet

Essential Details

Warranty: 3 Years

Model Number: KG-6420GM24

Rated Voltage: 3-24V

Rated Speed: 0.5-30RPM

Output Power: 0.5-15W

Continuous Current: Customizable

Place of Origin: Guangdong, China

Type: Gear Motor

Application: Smart toliet

Rated Torque: 150g.cm

Lead Time

Performance Specification

Drawings

Motor Picture

Motor Application

Gear Motor Introduction

A gearmotor (or geared motor) is a small electric motor (AC induction, permanent magnet DC, or brushless DC) designed with an integral (non-separable) gear reducer (gearhead) attached. The end shield on the drive end of the motor (light blue, below) is designed to provide a dual function.

The side facing the motor provides the armature/rotor bearing support and a sealing provision through which the integral rotor or armature shaft pinion passes. The other side of the motor end shield provides multiple bearing supports for the gearing itself, and a sealing and fastening provision for the gearhousing (orange, below). This construction offers many benefits for a user and eliminates the guesswork of sizing a motor and gear reducer on your own.

In general, gear motor function as torque multipliers and speed reducers, requiring less motor power to drive a given load.

Gear Motor Benefits

1. Using the right sized motor and gearhead combination for an application helps to prolong gearmotor life and allows for optimum power management and power utilization. Traditionally, design engineers oversized motors and gearheads to add “safety factors” — Bodine “factory matched” gearmotors consistently deliver rated performance.

2. Quieter operation due to integral castings and integral pinion, ground or hobbed on the armature or rotor shaft. Fewer parts requiring assembly resulting in “near perfect” alignment of the rotor, pinion and geartrain.

3. Minimum risk of lubricant leakage, because of “O-ring” and lip seal construction. The design can be more compact and the lubrication can be controlled better (for various mounting configurations).

4. Gearmotors eliminate the need for motor/gearhead couplings and eliminate any potential bearing alignment problems, common when a motor and gearhead are bolted together by an end-user (separable gearheads). Misalignment can result in bearing failure due to fretting corrosion.

Separable motor and gearhead solutions make more sense in larger integral horsepower (>1 HP) applications. For example, when a 100-pound motor is mounted to a 500-pound gearhead .

Shenzhen Go-Gold Motor Co., Ltd